Commercial Concrete Repair in the Twin Cities
Failed joints in a distribution center that runs three shifts. Spalling on a loading dock that takes 40 trailer hits a day. Trip hazards in a senior living corridor where a single fall triggers a regulatory review. ATR Floors repairs commercial concrete without grinding dust, without toxic fumes, and without the multi-day shutdowns that conventional methods demand.
30
Years in the Twin Cities
100%
Woman-Owned
CSP 1–4
Dust-Free Profiling
What We Repair
Concrete does not fail quietly. Hairline cracks widen into structural fractures, small spalls become tripping hazards, and joint sealant that dries out leads to slab edge deterioration that spreads across an entire bay. We address the problem before it becomes a safety liability.
Crack and Spall Repair
Structural and cosmetic cracks, pop-outs, and surface spalling in warehouse floors, parking structures, corridors, and production areas. Flexible epoxy for active cracks, rigid epoxy for dormant cracks, polyurea for fast return-to-service.
Floor Joint Repair and Resealing
Saw-cut control joints, construction joints, and isolation joints — the most common failure point in commercial slabs. We clean, re-cut, install new backer rod, and reseal with semi-rigid joint filler rated for the traffic load.
Loading Dock and High-Traffic Repair
Trailer plates drag, pallet jacks gouge, and seasonal freeze-thaw attacks the slab from below. Our protocol addresses both surface spalling and subgrade drainage issues that cause recurring damage.
Trip Hazard and ADA Repair
Any vertical displacement exceeding 1/4 inch in a pedestrian path is an ADA non-compliance issue. We grind, shave, or overlay trip hazards to bring the surface back to code, documented with before/after measurements.
Slab Edge and Joint Stabilization
When slab edges curl upward, the resulting lip differential can exceed 1/2 inch at the joint. We stabilize with injection grouting, polyurethane slab lifting, or overlay systems depending on severity.
Industrial Floor Repair
Warehouses, manufacturing plants, distribution centers, and food processing. Forklift-rated patch materials, chemical-resistant mortars for process areas, and rapid-cure systems that minimize downtime in 24/7 operations.
Signs the Slab Is Telling You Something
The question is not whether your slab will need repair. The question is whether you catch it before it becomes a safety liability, an ADA violation, or a floor covering failure.
Why Choose ATR Floors for Commercial Concrete Repair
Dust-Controlled Prep
Chemical-first surface prep means no airborne silica, no Table 1 containment, no shutdown.
Occupied-Facility Work
We repair around forklifts, residents, patients, and tenants — nights, weekends, phased zones.
2-Year Workmanship Warranty
Written warranty on every commercial repair, with full project documentation for your file.
Hazmat-Safe Removal
DeBOND and UnGLUED encapsulate hazardous materials rather than aerosolizing them.
Industries We Serve With Concrete Repair
Frequently Asked Questions
Yes. The Clean Slate Process is specifically designed for occupied commercial environments. Chemical-based removal generates no grinding dust, no airborne silica, and no toxic fumes — which eliminates the need for containment barriers, air monitoring, and facility shutdowns. We routinely repair floors in active warehouses, healthcare facilities, and senior living communities during off-hours or in phased zones while normal operations continue in adjacent areas.
Before any coating or adhesive is disturbed, we screen for hazardous materials — specifically lead-based paint and asbestos-containing mastics common in buildings constructed before 1985. If hazmat is confirmed, our DeBOND and UnGLUED chemistry encapsulates the hazardous material during removal rather than aerosolizing it the way mechanical grinding does.
Repair downtime depends on scope. Individual crack or spall repairs are typically walkable in 1 to 3 hours and fully cured in 24 hours. Full-bay joint repair in a warehouse may require 24 to 48 hours per bay. Loading dock resurfacing averages 48 to 72 hours. We schedule around your operational windows — nights, weekends, and phased zones are standard.
We match color, texture, and sheen to the surrounding slab as closely as the existing conditions allow. For polished concrete, we blend repaired areas into the existing polish level. For coated floors, we feather the coating transition. Where an exact match is not possible, we discuss the trade-offs with you before proceeding and provide samples.
ATR provides a 2-year workmanship warranty on all commercial concrete repair. Material warranties from manufacturers (epoxy, sealant, mortar systems) apply separately and vary by product. We provide warranty documentation with every completed project scope.
Your Concrete Is Telling You Something. Let Us Read It.
Submit photos and measurements for a detailed repair scope within 1 business day, or schedule a site walk and we'll assess the slab and recommend a prioritized repair plan.